Wireless passive infrared intrusion detector-北京冠川智能

关闭

建设中
 

language
 
 
Move PIR Detector

Wireless passive infrared intrusion detector

Wireless passive infrared intrusion detector

GC-5128EA

关闭

为了能迅速帮您解决问题,以下信息请如实填写!
公司名称:
联系人:

电话:

邮箱:
事项反馈:
 
  • Wireless passive infrared intrusion detector
This product is a wireless intelligent passive infrared anti-intrusion detector, it uses advanced high intelligent signal analysis and processing technology, provides ultra-high detection and anti-false alarm performance, from the design to ensure the stability of the product. When an intruder passes through the detection area, the detector automatically detects the movement of the human body in the area. If there is a dynamic movement phenomenon, it is like the control host sent an alarm signal. Products suitable for family housing, real estate villas, factory buildings, shopping malls, warehouses, office buildings and other places of safety precautions.

Features:
detection range adjustable,
real temperature compensation technology,
anti-disassembly alarm function,
battery under-voltage alarm indication,
alarm delay optional,
anti-radio frequency interference (20V/M-1GHZ),
wireless signal transmission,
Ultra-low power circuit design,
using SMT process manufacturing, anti-RFI,EMI interference.

Installation condition
1 should be avoided in outdoor, pet areas, near air conditioning, near heat sources, direct sunlight, and under rotating objects.
2, installation surface should be strong, and do not vibrate. The detector is installed in the place where the intruders are easy to pass through, perpendicular to the direction of travel, and the performance is better.

Operation description
1, function setting
1) DELAY: used to set alarm delay, when set delay 5 seconds is, for the test mode, that is, delay 5 seconds can trigger the second time: when set delay 5 minutes for power saving mode. In this mode, the detector has to wait 5 minutes to delay the second time after it is triggered. It is recommended to set the hopping needle in power saving mode after the test.
2) LED Jump: used to control the LED indicator lamp, without affecting the normal operation of the detector. When the detector yellow indicator light, indicating that the battery voltage is not enough, please replace the battery in time, lest affect the normal operation of the detector.
3) RANGR Jump: used to adjust the detection distance, can be adjusted according to the actual needs.
4) coding pin hopping: used to set the address code and area code between the alarm host and the alarm host. The A0-A7 is the address code, the D0-D3 is the data code and the address code of the alarm host should correspond to the alarm host. The data code is used to set the alarm area; The address code of the learning alarm host can be set at will, and the data code should correspond to the alarm host. Note: 1527 code detector does not need to set the coding tweaking.
5) Test switch: this switch can be used as a trigger switch for the login host. When using the learning alarm host, set the alarm host in learning mode, press the test switch, and log the detector to the alarm host.

2, walking test
1) when walking test, DELAY should be set in the state of delay of 5 seconds.
2) when the power supply is turned on, the detector enters the self-test state after 1 second of red LED indicator light, and the self-test time is about 30 seconds, and the detector enters the normal monitoring state after 30 seconds.
3) after the self-test, the tester passes through the detection area, the detector red LED indicator lights on, the detector sends the wireless alarm signal.

Note
1, please install and use correctly according to the instruction, do not touch the sensor surface, Do not affect the sensitivity of the detector, if you need to clean the sensor, please disconnect the power with a soft cloth with a little alcohol wipe.
2, this product can reduce the occurrence of accidents, but can not ensure foolproof. For your safety, in addition to the correct use of this product, in daily life to enhance vigilance, enhance awareness of safety prevention.
3. In order to ensure the normal operation of the detector, the power supply of the sensor should be maintained, and the walking test must be carried out periodically. It is recommended that the sensor be tested once a week.







GC-5128EA

Technical parameters:
working voltage: DC3V high capacity lithium battery,
static current: ≤ 25uA,
alarm current: ≤ 10mA,
battery life: 2-3 years,
detection distance: adjustable (2m, 4m, 9m),
detection angle: 110C,
Self-test time: about 30s,
alarm indication: red LED,
undervoltage indicator: yellow LED,
working temperature: -10 ℃ ~ 50 ℃,
ambient humidity: maximum 95%RH (no condensation phenomenon),
installation height: 1.7-2.5m,
Launch frequency: 315m or 433m,
launch distance: empty distance > 100m,
shape dimension: 90m 55m 43mm,
Order type
GC-5128EA
Document download
Product
——
Firmware

——